 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AND113R/RP Standard LED Standard Bright LED LAMPS Weight: 0:30 g o5.8 0.2 Unit: mm AND113R AND113R/RP Standard LED T-1 3/4 Package (5 mm) o5.0 0.2 2.5 max including resin 12.75 0.5 7.6 Features * Low power requirement * Flush-mount * All plastic molded lens * Color: GaP-Red * RoHS Compliant 0.5 Cathode Index 21.1 2.54 Cathode Index 0.5 1.5 (1) Optical Characteristics (Ta = 25C) Color LED Lens Red Clear Lens Desc. Axial Luminous Intensity (mcd) Min. 5 Typ. 18 Test Condition (IF-mA) 10 Viewing Angle 21/2 (deg) 30 1 2 1. Anode 2. Cathode o5.8 0.2 AND113RP o5.0 0.2 Red 7.6 2.5 max including resin Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol IF VR PD TOpr TStg Rating (Yellow) 25 5 120 -40 to +85 -40 to +85 Unit mA V mW C C (1) 0.5 26.5 Forward Current (DC) 1.5 Reverse Voltage Power Dissipation 2.54 Cathode Index 0.5 Operating Temperature 1. Anode 2. Cathode 1 2 Storage Temperature Range Electro-Optical Characteristics (Ta = 25C) Yellow Characteristics Symbol VF IR p Test Condition Min. Typ. 2.0 - 700 45 Max. 2.5 10 - - V A nm nm IF = 20mA VR = 5 V IF = 15mA IF = 15mA - - - - Unit Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width Precaution Please be careful of the following: 1. Soldering temperature: 260C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com 6/14/07 1 www.purdyelectronics.com AND113R/RP Standard LED Standard Bright LED LAMPS IF vs. VF 50 30 TA = 25C 20 30 10 50 5 3 2 1 1.7 60 70 80 90 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 40 10 0 10 20 30 40 50 60 70 80 90 1.0 Radiation Pattern Forward Current IF (mA) 20 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 IV vs. IF 5 1.0 Relative Luminous Intensity - Wavelength Relative Luminous Intensity IV Relative Luminous Intensity 20 2 5 10 Forward Current IF (mA) 50 2 1 0.5 0.8 0.6 0.4 0.2 0.1 1 0.2 0 640 660 680 700 720 740 760 This graph shows relative luminous vs. forward current. At three points (IF = 10, 15, 20mA) each relation is normalized.) Wavelength (nm) IV vs. TC 3 IV vs.TA Relative Luminous Intensity IV 2 Allowable Forward Current IF (mA) 0 20 40 60 Case Temperature TC (C) 80 40 30 1 20 0.5 0.4 0.3 -20 10 0 0 20 40 60 80 100 Ambient Temperature TA (C) 2 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com 6/14/07 www.purdyelectronics.com |
Price & Availability of AND113R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |